Our Blog

You waited for this movie all year. You got your tickets early, and you’ve got the best seats in the theater. Whether you paid to see the latest action flick or the most romantic comedy in the history of romcoms, it’s not as nearly as much fun if the trip to the snack bar is a horror story. Perhaps Dr. Brent Nickolaychuk can help!

If you’re wearing traditional braces, the usual suspects, chewy, sticky, hard, and crunchy foods, are still off limits even when the lights go down. Let’s look at some alternative casting.

• The Candy Counter

Licorice, caramels, taffy, and candy with nuts can make any film a disaster movie—and can make your next visit to our Winnipeg, Selkirk, or Southdale, MB office an emergency one. Stick with soft chocolates, chocolates with creamy fillings, ice cream, and ice cream bars (without nuts or caramel, of course).

• The Soda Fountain

Sodas won’t break your braces, but they will damage your teeth, so try to brush as soon as you can or rinse with water after enjoying one of those titanic servings. And no crunching on ice! That can damage your braces.

• The Popcorn Machine

Sorry, we can’t help you here. Popcorn, with or without that tempting flood of melted butter, is off limits. The kernels can get lodged between your teeth and braces, and can be very hard to remove. They can also cause breakage to wires and brackets.

If you still crave something salty, check with us to see if soft pretzels or baked potato chips might be an option for you.

Movie treats contain a lot of starches and sugars, which stick to braces and feed cavity-causing bacteria, so it’s always best to go easy on the snacks. But you don’t have to give up the concession counter completely—just enjoy in moderation and be sure to brush thoroughly when you get home.

And if you wear clear aligners? You can remove your aligners, eat what you like, and clean your teeth carefully before replacing them. But do remember—you’re supposed to wear your aligners for a set number of hours each day. If you’re looking forward to a four-hour epic, make sure to take into account your treatment schedule.

We don’t know if your movie was worth the wait. But we do know that the results of your orthodontic treatment will be! Take care of your teeth and braces, and you’ll be on the fastest, healthiest track to an award-winning, red carpet smile.

Analyzing strong points, looking for potential problems, making comparisons—it’s bracketology time! Nope, not basketball (although we hear they have something similar), but a brief analysis of your orthodontic options when it comes to choosing a winning bracket.

If you’re getting braces, you’re probably already familiar with how they work—brackets are bonded to the teeth to hold an archwire, which provides gentle, controlled pressure to move the teeth into alignment. But within that basic bracket-and-wire system, there are several different bracket designs available to you at our Winnipeg, Selkirk, or Southdale, MB orthodontic office. Let’s see what the scouting report has turned up on our final four, pointing out their distinct advantages as well as some potential mismatches.

Traditional metal brackets

Advantages:

• Traditional braces with metal brackets are effective for more than just straightening teeth. They can be used to correct rotated teeth, differences in tooth height, and bite problems. For severe bite and alignment problems, traditional braces are most often the right choice.
• Metal construction makes these brackets able to handle the controlled pressure needed to treat serious malocclusions.
• Cost-effective. These are usually the least expensive option.

Potential Disadvantage:

Clear/Ceramic Brackets

Advantages:

• Lack of visibility! Whether you go for clear brackets or brackets tinted to match your enamel, you’ll be keeping a low-profile with this choice.
• Stronger and more stain-resistant than ever before, using the latest in ceramic, porcelain, or plastic materials.

Potential Disadvantages:

• Not as durable. Unlike metal, these clear brackets can crack or break. If you play a contact sport, these might not be for you.
• Some ceramic brackets are larger than other choices, so might be recommended only for the top teeth.
• Clear or tinted brackets can be more expensive.

Self-Ligating Brackets

Advantages:

• These brackets use a clip or trapdoor mechanism to hold your archwire without the need of bands. Ceramic options are available if you want an even more discreet appearance.
• Can be more comfortable with less friction between wire and bracket.

Potential Disadvantages:

• Self-ligating braces are generally more expensive.

Lingual Braces

Advantages:

• Lingual braces use metal brackets, but they attach to the back of each tooth for almost invisible bite correction.
• Custom-made. Lingual brackets can be designed and fabricated to fit your individual teeth perfectly.

Potential Disadvantages:

• Trickier to clean because of their placement behind teeth.
• Might not be suitable for a deep bite if there’s not enough clearance between top and bottom teeth.
• Initial discomfort caused by the tongue’s contact with the braces when you speak and eat.
• Custom-made brackets are more expensive.

So that’s a brief rundown of your bracket choices. But, unlike sports bracketology, there are no losers here! Dr. Brent Nickolaychuk can give you the pros and cons of each bracket design, so you can make an informed decision based on the kind of braces which will work best for you. With coaching like that, no matter which bracket option you choose, the final result is the same—a winning smile!

The words “overbite” and “overjet” certainly sound similar. Both conditions concern your front teeth. Both conditions fall under the same category of bite problems—Class II malocclusions, if you want to be technical. So it’s not surprising that they’re often used interchangeably. But while there are similarities, overbite and overjet are also distinctly different.

• Overbite/Overjet Geometry

In a healthy bite, the front top teeth project slightly beyond, and slightly overlap, the bottom teeth. The key word here is “slightly.” With a Class II malocclusion, the upper front teeth project further beyond the lower teeth than they should.

Of course, teeth and bites are as individual as we are, so there are variations in just how and just how much the overlap occurs. In diagnosing an overbite vs. an overjet, the difference comes down to a matter of vertical vs. horizontal.

An overbite, or deep bite, occurs when the top teeth vertically overlap the bottom teeth more than they should for a healthy bite. Generally, when a person’s top teeth cover more than a quarter of the bottom teeth when biting down, or more than two to three millimeters, that person is said to have an overbite.

An overjet, commonly known as protruding or buck teeth, is the result of a horizontal overlap that is broader than normal. This causes the top teeth to project outward toward the lips more than they do in a typical bite. An overjet is usually diagnosed when the horizontal distance between the top and bottom teeth exceeds two to three millimeters.

• Overbite/Overjet Causes

The causes for both an overbite and an overjet might be dental (caused by tooth alignment), or skeletal (caused by bone development), or a combination of both. These bite problems can run in families. They are also affected by the size and position of the jaws and the shape and position of the teeth.

Early oral habits, such as prolonged and vigorous thumb-sucking or pacifier use, can also contribute to the development of a Class II malocclusion, particularly an overjet. Consistent pressure from thump or pacifier pushes the teeth outward as they erupt, which encourages them to protrude. These oral habits can affect the shape of the palate and jaw, too.

• Overbite/Overjet Treatments

There are many types of treatment available to correct teeth and bite misalignments. Dr. Brent Nickolaychuk will tailor your treatment to your specific malocclusion for the best orthodontic outcome.

If you have a mild malocclusion, and minor dental issues are the main cause of that malocclusion, either braces or clear aligners can be effective for an overjet or an overbite. Elastics (rubber bands) are often used as part of this treatment.

If the malocclusion is due to bite problems caused by uneven upper and lower jaw development, devices called functional appliances can be used with braces to help guide the growth of the jawbones while young patients’ bones are still forming. These include appliances that work inside the mouth to help the upper and lower jaws grow proportionally, and external appliances such as headgear.

In some cases, where the malocclusion is skeletal in nature as well as dental, surgical treatment might be necessary to reshape the jawbone itself. Orthodontic treatment is usually needed as well both before and after surgery.

• Overbite/Overjet Consequences

Over time, a deep overbite can cause damaged gum tissue, worn enamel, and fractured teeth. When teeth protrude because of an overjet, they can lead to self-consciousness and are more at risk for injury. Both malocclusions share dental and medical consequences, including concerns about facial and jaw appearance, problems speaking or chewing, headaches, and face and jaw pain.

Class II malocclusions aren’t all the same, and orthodontic patients aren’t all the same either. You may have a minor malocclusion or a significant one. You may have an overbite, or an overjet, or a combination of different bite and alignment concerns. Your malocclusion may not bother you at all, or it may cause pain, discomfort, or self-consciousness.

That’s why every overbite or overjet should be evaluated by an orthodontist. When you visit our Winnipeg, Selkirk, or Southdale, MB orthodontic office, Dr. Brent Nickolaychuk will be able to diagnose the exact nature of your malocclusion, the reason for it, and your best individualized treatment plan. An overbite and an overjet are different malocclusions, but you and your orthodontist want the same outcome for each: a healthy, attractive, and confident smile!

Let’s see…

Toothbrush? Check.

Fluoride toothpaste? Check.

Floss? Check.

Two minutes of thorough brushing? Check.

Careful cleaning around your brackets and wires? Check.

Wait… there’s something else… it’s right on the tip of your…

Ah! Your tongue! Whenever you brush, morning, evening, or any time in between, if you want the freshest breath and cleanest teeth, don’t forget your tongue.

Why your tongue? Because the tongue is one of the most common sources of bad breath. Let’s examine just why this occurs.

The tongue is made up of a group of muscles that help us speak and chew and swallow. But there’s more to this remarkable organ than mere muscle. The surface of the tongue is covered with mucous membrane, like the smooth tissue which lines our mouths. But the tongue isn’t completely smooth—it’s textured with thousands of tiny bumps called papillae.

These little elevated surfaces have several shapes and functions. Some make the tongue’s surface a bit rough, which helps move food through your mouth. Some are temperature sensitive, letting you know that your slice of pizza is much too hot. And some are covered with thousands of the taste buds, which make eating that pizza so enjoyable.

All of these papillae with their various functions combine to create a textured surface, filled with miniscule nooks and crannies. And if there’s a nook or a cranny where bacteria can collect, no matter how miniscule, it’s a good bet that they will, and the surface of the tongue is no exception. But bacteria aren’t alone—the tongue’s surface can also hide food particles and dead cells.

How does this unappealing accumulation affect you? These elements work together to cause bad breath, especially the bacteria that break down food particles and cell debris to produce volatile sulfur compounds—compounds which create a particularly unpleasant odor. Including your tongue in your brushing routine helps remove one of the main causes of bad breath.

And that’s not the only benefit! Cleaning the tongue helps eliminate the white coating caused by bacterial film, and might even improve the sense of taste. Most important, studies show that regular cleaning noticeably lowers the levels of decay-causing plaque throughout the mouth.

So, how to get rid of that unwanted, unpleasant, and unhealthy debris?

• When you’re done brushing your teeth, use your toothbrush to brush your tongue.

Clean your tongue by brushing gently front to back and then side to side. Rinse your mouth when you’re through. Simple as that! And just like a soft-bristled toothbrush helps protect tooth enamel and gum tissue, we also recommend soft bristles when you brush your tongue. Firm bristles can be too hard on tongue tissue.

• Use a tongue scraper.

Some people find tongue scrapers more effective than brushing. Available in different shapes and materials, these tools are used to gently scrape the surface of the tongue clean of bacteria and debris. Always apply this tool from back to front, and rinse the scraper clean after every stroke. Wash and dry it when you’re through.

• Add a mouthwash or rinse.

As part of your oral hygiene routine, antibacterial mouthwashes and rinses can assist in preventing bad breath. Ask Dr. Brent Nickolaychuk for a recommendation.

• Don’t brush or scrape too vigorously.

Your tongue is a sturdy, hard-working organ, but tongue tissue is still delicate enough to be injured with over-vigorous cleaning.

Taking a few extra seconds to clean your tongue helps eliminate the bacteria and food particles which contribute to bad breath and plaque formation. Make this practice part of your daily brushing routine—it’s a healthy habit well worth remembering!